Tornado 14 CUX 4.2 Range Rover LSE Classic Chip Set (NAS Spec available)
What do I get? You will get updated software to install into a Lucas 14CUX “Hotwire” Fuel Injection computer. The software is supplied in an EPROM chip with the necessary decoder board, all packed in an anti-static shipping box. Fitting instructions are supplied, with full colour photographs. This software is intended for 4.2 Litre engines, […]
Rover V8 Motronic THOR ECU for stand alone running / engine transplant with tornado map
Rover V8 Motronic THOR ECU for stand alone running to allow engine transplant. These units also work well in the original Discovery 2 or P38 Range Rover vehicles, where no immobiliser is required. This is a Bosch Motronic ECM that has been re-engineered at Tornado HQ to allow the later rover V8 THOR engines to […]
Tornado 14 CUX NAS Spec chip upgrade 3.9
What do I get? You are buying updated software to install into a Lucas 14CUX “Hotwire” Fuel Injection computer. The software is supplied in an EPROM chip with the necessary decoder board, all packed in an anti-static shipping box. These parts are shown in the picture at the top of this listing. Fitting instructions are […]
Rover V8 adjustable fuel pressure regulator kit
Rover v8 adjustable fuel pressure regulator kit suitable for all Rover v8 engines from 13cu up until GEMS Included in the kit Adjustable fuel reg 1-5 bar Fuel rail fitting adapter Fuel hose Vacuum hose Hose joiners and pipe clips
Magnecor Rover V8 GEMS Leads
Magnecor ignition leads Made to Tornado systems spec By Magnecor with CN22 cable for a longer burn time and heat proof angled boots for the best fit. kit contains :- 8 x Numbered plug leads. Lead clips. Suitable for all GEMS engines with coil pack behind plenum. Magnecor KV85 Race Leads are used extensively and […]
14CUX Genuine OEM Stepper Motor
14 CUX Stepper motor from the original manufacturer Suitable for all engines equipped with the 14Cux ECU
Tornado 14CUX NAS spec chip upgrade 4.6
What do I get? You are buying updated software to install into a Lucas 14CUX “Hotwire” Fuel Injection computer. The software is supplied in an EPROM chip with the necessary decoder board, all packed in an anti-static shipping box. These parts are shown in the picture at the top of this listing. Fitting instructions are […]
Lucas 4CU ECU remanufactured and upgraded with tornado software
LUCAS 4CU. Tornado remanufactured and upgraded ECU by Mark Adams (not to be confused with repaired or second hand unit). Individually calibrated and tested for 24 hours. Offers 10-15bhp and 10-15% fuel economy with a healthy engine These can be reconfigured to suit 3.9 4.0 4.2 4.6 4.8 5.0 litre and to run the larger Jaguar […]
Tornado GEMS Chip set for Range Rover V8 with capacity upgrade 4.8 5.0 5.2 5.3
Tornado GEMS Chip set for Range Rover V8 that have been rebuilt to a higher capacity please call with your exact requirements What are the benefits? The Lucas-Sagem GEMS system is one of the most sophisticated Rover V8 engine management systems available. It responds exceptionally well to a software upgrade. The software upgrade itself is […]
EFI fuel pump and swirl pot assembly
EFI Fuel pump / Swirl pot assembly When converting a vehicle to electronic fuel injection you have to consider adding a swirl pot to prevent fuel starvation and a high pressure fuel pump to meet the requirements of the new system. Now Tornado has a solution, both combined into one and the assembly is suitable for nearly EFI systems […]